"Hydrofeel" Basic Lotion

This simple moisturizing lotion with our "Hydrofeel" emulsifier is easy to make and can be used for both face and body. It applies with a wonderfully silky feel, feels light, yet is moisturizing.

 

Emulblend Hydrofeel and cetearyl alcohol create hydrosomes and a gel-emulsion structure that provides long-lasting hydration. Hydromollient strengthens the skin barrier and further extends the moisturizing effect of Emulblend Hydrofeel.

 

innometics-basis-lotion-hydrofeel


Difficulty: ⭐⭐ intermediate

Preparation time: ⏱ approx. 35 minutes

Ingredients in percent

 

A1
Propanediol Green 8
Xanthan Sense 0.5
A2
Distilled water 64.3
Citric acid solution 0.2
A3
Emulblend Hydrofeel 4
Cetearyl alcohol 3
B
Hydromollient 5
Squalane 5
Lipoblend Ultralite 5
Anti-Ox Emulsion 1
C Preblend Aqua 2
100 %

 

Instructions:

Weigh A1 and mix

Add A1 to A2 while stirring so that Xanthan Sense does not clump

Add A3 and stir in

Heat A to 80 degrees

Continue to maintain the temperature of A at 75 degrees for approx. 20 minutes, stirring occasionally

Weigh B and heat to 70 degrees

Add B to A and stir in slowly

Homogenize for 60 seconds (the hot fat phase is slowly homogenized in the process)

Cool to 45 degrees while stirring gently

Stir in the ingredients of C one after the other

Check the pH value and adjust to approx. 5.2 with a citric acid solution

 

TIP: You can use the base lotion either in a 100ml amber glass jar as facial care or in a 200ml pump dispenser as a body lotion.


Leave a comment

Please note, comments must be approved before they are published


FAQ: Frequently Asked Questions about "Hydrofeel" Basic Lotion

Wofür eignet sich die Basis Lotion „Hydrofeel“?

Die leichte Feuchtigkeitslotion kannst du für Gesicht und Körper verwenden. Im Tiegel dient sie als Gesichtspflege, im Pumpspender als Bodylotion.

Warum spendet die Lotion so lange Feuchtigkeit?

Emulblend Hydrofeel und Cetearylalkohol bilden Hydrosome und eine Gel-Emulsionsstruktur, die Wasser bindet und nach und nach abgibt. Hydromollient stärkt zusätzlich die Hautbarriere.

Warum wird die Wasserphase 20 Minuten warm gehalten?

Damit sich die Hydrosome optimal bilden können. Du erhitzt Phase A auf 80 Grad und hältst sie etwa 20 Minuten bei 75 Grad, gelegentlich rühren.

Wie aufwendig ist die Herstellung?

Das Rezept ist mittelschwer (zwei Sterne) und dauert etwa 35 Minuten. Nach dem Homogenisieren kühlst du auf 45 Grad ab, rührst Phase C ein und stellst den pH-Wert auf etwa 5,2 ein.

Welches Wasser verwende ich?

Verwende destilliertes Wasser. Warum, erklärt unser Beitrag Kosmetik selbst herstellen: destilliertes Wasser.