Basic Milk "Saponin"

The emulsion is fluid and creamy, easy to apply, and provides an enveloping, soft, and very velvety skin feel. Thanks to T-Saponin, it has an opaque, creamy color and a mild, plant-based scent.

 

In this formulation, T-Saponin serves as a powerful emulsifier in combination with Emulblend Hydrofeel and cetearyl alcohol.

  

Difficulty level: ⭐⭐ medium

Production time: ⏱ approx. 35 minutes

Ingredients in percent

 

A1
Propanediol Green 6
T-Saponin 0.2
Xanthan Sense 0.4
Instabond Velvet 2
A2
Citric acid 0.1
Lavender hydrosol, organic preserved 8
Preblend Aqua S 1.5
Distilled water 64.1
A3
Cetearyl alcohol 3.5
Emulblend Hydrofeel 1
B
Jojoba oil, organic 5
Liposens 5
Vegemelt 2
Creamy Almond 0.2
Anti-Ox Emulsion 1
100

 

Instructions:

  1. Weigh out and mix A1
  2. Mix A2 until the citric acid has dissolved
  3. Add A2 to A1 while stirring to prevent the gelling agents from clumping
  4. Add A3 and stir in
  5. Heat A to 70 degrees, stirring continuously
  6. Briefly homogenize A with a mixer
  7. Weigh out B and heat to approx. 50 degrees until Vegemelt melts
  8. Combine A and B and mix
  9. Homogenize for 60 seconds
  10. Cool to 45 degrees while stirring gently
  11. Check the pH value and adjust to approx. 5.2 - 5.5 using a citric acid solution

     

     

     


    Leave a comment

    Please note, comments must be approved before they are published


    FAQ: Frequently Asked Questions about Basic Milk "Saponin"

    Wie fühlt sich die Basic Milk „Saponin“ an?

    Die fluid-cremige Emulsion lässt sich leicht auftragen und hinterlässt ein weiches, samtiges Hautgefühl. T-Saponin gibt ihr eine opak-cremige Farbe und einen mild-pflanzlichen Eigenduft.

    Welche Rolle spielt T-Saponin?

    T-Saponin dient als kraftvoller Emulgator, kombiniert mit Emulblend Hydrofeel und Cetearylalkohol.

    Wie aufwendig ist die Herstellung?

    Das Rezept ist mittelschwer (zwei Sterne) und dauert etwa 35 Minuten. Du erwärmst die Wasserphase mit den Emulgatoren auf 70 Grad, die Ölphase auf etwa 50 Grad, verrührst beides, homogenisierst 60 Sekunden und kühlst auf 45 Grad ab.

    Welchen pH-Wert sollte die Milk haben?

    Stelle den pH-Wert mit einer Zitronensäurelösung auf etwa 5,2–5,5 ein. Wie das geht, erklärt unser Beitrag pH-Wert einstellen.