"Rich" Emulserum

A purely natural, delicately enveloping, nourishing anti-aging serum for dry and demanding skin.

 

 

Difficulty:  ⭐⭐ medium

Production time: ⏱ approx. 35 minutes

Apicell and Oculift promote collagen formation, improve skin texture, and plump up wrinkles.

In this formulation, CBD-Balance unfolds its enveloping properties and also has a skin-soothing effect. 

Lipoblend Coushion gives the product a subtle richness and a soft finish.

 

Raw materials in percent 

Percent
A1 Butylene Glycol Green 6
Xanthan Sense 0.7
High Molecular Weight Hyaluronic Acid 0.2
Low Molecular Weight Hyaluronic Acid 0.2
Agasilk 0.5
A2 Distilled water 73.75
Sodium Stearoyl Glutamate 0.2
AloeFerment 3
Citric Acid 0.1
Arginine 0.05
Preblend Aqua S 2.2
B Squalane 4
Lipoblend Coushion 0.6
Lipoblend Ultralite 2
Anti-Ox Emulsion 0.5
C CBD-Balance 2
OcuLift 3
Apicell 1
Total 100


Instructions

Weigh A1 and stir briefly

Weigh A2 and stir until all ingredients are dissolved

Adjust the pH to approx. 5 - 5.2 using citric acid/arginine

Add A1 to A2 while stirring to ensure no clumps form

Weigh B, stir, add to A and stir in

Homogenize vigorously with a mixer - avoid air bubbles

Add C and stir in thoroughly

Check the pH again

 

TIP

Sodium Stearoyl Glutamate is the perfect emulsifier for binding large amounts of water and providing stability to the product. Only a small amount is needed here to emulsify the fat phase, as the high proportion of gel formers takes over the stabilizing role.

 


Leave a comment


FAQ: Frequently Asked Questions about "Rich" Emulserum

Für welche Haut eignet sich das Emulserum „Rich“?

Das rein natürliche, zart einhüllende Anti-Aging-Serum ist für trockene und anspruchsvolle Haut gedacht.

Welche Wirkstoffe enthält das Serum?

Apicell und OcuLift unterstützen die Kollagenbildung und polstern auf, CBD Balance wirkt einhüllend und beruhigend. Dazu kommen Hyaluronsäure, Agasilk und AloeFerment.

Wie aufwendig ist die Herstellung?

Das Rezept ist mittelschwer (zwei Sterne) und dauert etwa 35 Minuten – ohne Erhitzen. Du stellst die Wasserphase auf pH 5–5,2 ein, rührst die Gelbildner ein, homogenisierst die Ölphase kräftig ein und gibst zum Schluss die Wirkstoffe dazu.

Warum reicht so wenig Emulgator?

Sodium Stearoyl Glutamate bindet viel Wasser und bringt Stabilität. Weil der hohe Anteil an Gelbildnern zusätzlich stabilisiert, genügt eine kleine Menge, um die Ölphase zu emulgieren.