Vitamin C Serum

This serum ensures an even, radiant complexion, provides increased moisture, and counteracts premature skin aging.

 


Difficulty: ⭐⭐ medium

Preparation time: ⏱ approx. 20 minutes

 

Ascorbyl glucoside promotes collagen formation, evens out the complexion, and encourages clear skin. Arginine regulates the pH value and also provides intensive hydration and regeneration. Niacinamide works in synergy with vitamin C and refines pores. Hyaluronic acid and Agasilk provide extra moisture and improve the product's texture.

 

Raw materials in percent

    % 
A1 Butylene Glycol Green 10
Hydroxyacetophenone 0.7
A2 Agasilk 0.3
High molecular weight hyaluronic acid 0.3
Low molecular weight hyaluronic acid 0.2
Xanthan Sense 0.6
B1 Distilled water 82.3
Ascorbyl glucoside 2
Citric acid 0.1
L-Arginine 1.5
B2 Niacinamide 2
     
  Total 100


Instructions

Mix A1 and heat slightly until the hydroxyacetophenone is dissolved.

Add A2 and stir briefly.

Mix B1 until all ingredients are dissolved.

Measure the pH value and adjust to 6.1 - 6.5.

Add B2 and stir in.

Add B to A while stirring to prevent lumps from forming.

Let it rest for a few hours, stir carefully once more, and fill into containers.


TIP

Ascorbyl glucoside is highly water-soluble and easy to work with, but it requires a pH value higher than the typical 5–5.5 found in other cosmetic products. This is important so that it remains active over the long term and does not degrade prematurely in the product. Ascorbyl glucoside is acidic by nature and requires a significant amount of arginine to raise and stabilize the pH of the final product. It is most stable between pH 6 and 6.5, which is where the final product's pH should ideally be.


FAQ: Frequently Asked Questions about Vitamin C Serum

Was bewirkt das Vitamin C Serum?

Es sorgt für ein ebenmäßiges, strahlendes Hautbild, spendet Feuchtigkeit und wirkt vorzeitiger Hautalterung entgegen.

Welche Wirkstoffe enthält das Serum?

Ascorbylglucosid (Vitamin C) unterstützt die Kollagenbildung und gleicht den Teint aus, Niacinamid wirkt synergistisch und verfeinert die Poren. Hyaluronsäure und Agasilk sorgen für extra Feuchtigkeit.

Warum braucht das Serum einen pH-Wert von 6,1–6,5?

Ascorbylglucosid ist am stabilsten zwischen pH 6 und 6,5 und bleibt so langfristig aktiv. Weil es von Natur aus sauer ist, braucht es eine nennenswerte Menge L-Arginin, um den pH-Wert anzuheben und zu stabilisieren.

Wie stelle ich das Serum her?

Du löst Hydroxyacetophenon unter leichtem Erwärmen in Butylenglykol, gibst die Gelbildner dazu, löst die Wirkstoffe im Wasser und stellst den pH-Wert ein. Dann kommt Niacinamid dazu, und du gibst B unter Rühren zu A. Nach einigen Stunden Ruhezeit abfüllen. Das Rezept ist mittelschwer und dauert etwa 20 Minuten. Mehr zum pH-Wert im Beitrag pH-Wert einstellen.