Massage Lotion "Heat"


A soothing treat for tense or aching muscles. Use the cream for massage or simply when you want to relax.

 

Difficulty level: ⭐⭐⭐ advanced

Preparation time: ⏱ approx. 40 minutes

 

VBE produces a pleasant, long-lasting warmth and has a relaxing effect on the muscles. Menthol promotes circulation and has an invigorating and activating effect on the muscles. CBD-Balance and lavender oil support the relaxing effect and counteract any skin irritation caused by VBE.

 

Raw materials in percent:

    Percent
A Distilled water 66.4
Butylene Glycol Green 5
Sodium Stearoyl Glutamate 0.1
Preplend Aqua S 1.5
     
B1 Emulwax Rice 3
Montanov 14 1
Liposens 10
Lipoblend Cushion 1
B2 Anti-Ox Emulsion 0.5
Menthol 3
B3 Ecobond Tara 0.7
     
C Ethanol 96% 5
Vanillyl Butyl Ether (VBE) 0.5
Lavender essential oil 0.3
CBD-Balance 2
  Total 100


Instructions

Stir A

Heat A to approx. 50 degrees and stir occasionally to dissolve all ingredients

Stir B1 and heat to approx. 70 degrees until all ingredients are melted

Add B2 and stir until the menthol is dissolved

Add B3 and stir in

Add B to A and stir in

Homogenize thoroughly with a mixer

Let cool to below 45 degrees - stir occasionally

Stir C, add it, and stir in thoroughly

Homogenize briefly again

Let cool further and stir occasionally

 

TIP:

VBE is a highly activating substance that creates a warm feeling on the skin, but can also be slightly irritating with regular use. For very sensitive skin, it can be slightly reduced, e.g., to 0.4 or even 0.3%. When handling the raw material, make sure not to get it in your eyes or accidentally on your mucous membranes.


Leave a comment

Please note, comments must be approved before they are published


FAQ: Frequently Asked Questions about Massage Lotion "Heat"

Wofür verwende ich die Massagelotion „Heat“?

Bei verspannter Muskulatur, zur Massage oder einfach zum Entspannen. Die Lotion erzeugt ein angenehmes, langanhaltendes Wärmegefühl.

Welche Wirkstoffe sorgen für den Wärmeeffekt?

Vanillyl Butyl Ether (VBE) erzeugt die Wärme, Menthol wirkt belebend. CBD Balance und Lavendelöl unterstützen die Entspannung und wirken Hautreizungen durch VBE entgegen.

Wie aufwendig ist die Herstellung?

Das Rezept ist als fortgeschritten (drei Sterne) eingestuft und dauert etwa 40 Minuten. Die Wasserphase wird auf etwa 50 Grad, die Fettphase auf etwa 70 Grad erwärmt; darin löst du das Menthol. Nach dem Homogenisieren gibst du unter 45 Grad die Mischung aus Alkohol, VBE, Lavendelöl und CBD Balance dazu.

Was muss ich bei VBE beachten?

VBE ist stark aktivierend und kann bei regelmäßiger Anwendung leicht reizen. Bei sehr sensibler Haut kannst du es auf 0,4 oder 0,3 % reduzieren. Achte beim Arbeiten darauf, nicht in die Augen oder an Schleimhäute zu kommen.