24h Cream "Hyaluron"

This anti-aging cream is suitable for very dry and sensitive skin and can be used day and night. Despite its high oil content, the cream feels silky smooth and offers a luxurious application experience.

Difficulty:  ⭐⭐⭐ advanced

Preparation time: ⏱ approx. 45 minutes

High and low molecular weight hyaluronic acid provide long-lasting moisture and have a slightly plumping effect. Calcium Pantothenate accelerates skin regeneration and soothes redness. A high content of oils and humectants keeps the skin supple for a long time and reliably counteracts feelings of tightness.

Ingredients in percent

A2 54.1 distilled water
B
  4 Almond oil
10 Squalane
  8 Lipoblend Ultralite
C   2 Preblend Aqua
  0.1 Calcium Pantothenate
  1 Anti-Ox Emulsion
  1 Niacinamide

 

YIELDS 100%

Instructions

  1. Weigh A1 and stir
  2. Add A2 to A1 while stirring to prevent the Xanthan from clumping
  3. Add A3 and stir in
  4. Heat A (123) to 75 degrees and stir occasionally (Behenyl alcohol must melt completely)
  5. Homogenize briefly with a mixer – a milky emulsion should form
  6. Add B (oil phase) to A (water phase) and stir in
  7. Homogenize for 1 minute with the mixer
  8. Let cool to approx. 40 degrees while stirring occasionally
  9. Add C one by one and stir in
  10. Homogenize briefly again with the mixer
  11. Adjust the pH to approx. 5.2 with a citric acid solution

Tip:

Sometimes emulsions are easier to make if the emulsifier system is dissolved in the water phase. This is especially true for high oil phases or low water phases.


FAQ: Frequently Asked Questions about 24h Cream "Hyaluron"

Für welche Haut eignet sich die 24-h-Creme „Hyaluron“?

Die Anti-Aging-Creme ist für sehr trockene und empfindliche Haut gedacht und kann Tag und Nacht verwendet werden. Trotz hohem Ölanteil fühlt sie sich seidig-weich an.

Welche Wirkstoffe enthält die Creme?

Hoch- und niedermolekulare Hyaluronsäure spenden langanhaltend Feuchtigkeit, Hydrachrysum verbessert die Langzeitfeuchtigkeit. Dazu kommen Calcium Pantothenate und Niacinamid.

Wie aufwendig ist die Herstellung?

Das Rezept ist als fortgeschritten (drei Sterne) eingestuft und dauert etwa 45 Minuten. Du erhitzt die Wasserphase mit dem Emulgator auf 75 Grad, bis der Behenylalkohol vollständig geschmolzen ist, homogenisierst die Ölphase ein und gibst Phase C bei etwa 40 Grad dazu. Der pH-Wert wird auf etwa 5,2 eingestellt.

Warum wird der Emulgator in der Wasserphase gelöst?

Bei hohen Fettphasen bzw. wenig Wasser gelingen Emulsionen oft leichter, wenn das Emulgatorsystem in der Wasserphase gelöst wird. Mehr zu Emulsionen im Beitrag Was ist eine Emulsion?