Melting Body Cream

This nourishing body cream literally melts upon contact with the skin, offering an exceptional skincare experience. Excellent as a care cream for dry skin, which nevertheless has a non-greasy effect.

Lipid components with varying melting points ensure the characteristic melting skin feel. Montanov 14 provides a creamy, light consistency. Instabond Velvet acts as a thickening and stabilizing agent, leaving a velvety finish on the skin. Jojoba esters and Hydrachrysum soothe irritation and provide long-lasting moisture.

Difficulty level: ⭐⭐⭐ advanced

Production time: ⏱ approx. 40 minutes

Ingredients in percent

A1 6 Propanediol Green
2.5 Instabond Velvet
A2 63.5 dist. water
B 2 Montanov 14

2 Emulblend Olea
4 Lipoblend Ultralite
3 Lipoblend Hydrosoft
2 Waxblend Hydrosoft
8 Vegemelt
C 2 Preblend Aqua
0.5 Jojoba ester gel
1 Hydrachrysum
0.5 Anti-Ox Emulsion
q.s. Citric acid solution

YIELDS 100%

Instructions:

  1. Weigh out A1 and stir
  2. Weigh out A2 and stir
  3. Add A1 to A2 while stirring so that Instabond Velvet does not clump
  4. Heat A to approx. 60 degrees
  5. Weigh out B and heat to approx. 70 degrees until all components have melted.
  6. Add B (fat phase) to A (water phase) and stir in
  7. Homogenize for 1 minute with a mixer
  8. Allow to cool to approx. 40 degrees while stirring occasionally
  9. Add C (one component after the other) and stir in
  10. Homogenize briefly again with the mixer
  11. Adjust the pH value to approx. 5.2 with a citric acid solution

Leave a comment

Please note, comments must be approved before they are published


FAQ: Frequently Asked Questions about Melting Body Cream

Was macht die Melting Bodycream besonders?

Die Creme schmilzt bei Hautkontakt regelrecht. Dafür sorgen Lipidkomponenten mit unterschiedlichen Schmelzpunkten. Sie pflegt trockene Haut, wirkt aber wenig fettend. Mehr dazu im Beitrag Fette und Fettsäuren.

Welche Rohstoffe bestimmen die Konsistenz?

Montanov 14 bringt eine cremig-leichte Konsistenz, Instabond Velvet verdickt, stabilisiert und hinterlässt ein samtiges Finish. Jojobaester und Hydrachrysum sorgen für langanhaltende Feuchtigkeit.

Wie aufwendig ist die Herstellung?

Das Rezept ist als fortgeschritten (drei Sterne) eingestuft und dauert etwa 40 Minuten. Die Wasserphase wird auf etwa 60 Grad, die Fettphase auf etwa 70 Grad erwärmt; danach emulgierst du, homogenisierst eine Minute und gibst Phase C bei etwa 40 Grad dazu. Wie du auch ohne Thermometer arbeiten kannst, erklärt der Beitrag Kosmetik herstellen mit und ohne Thermometer.

Warum klumpt Instabond Velvet nicht?

Du verrührst Instabond Velvet zuerst mit Propanediol (A1) und gibst diese Mischung dann unter Rühren ins Wasser. So verteilt es sich gleichmäßig.

Welchen pH-Wert sollte die Creme haben?

Stelle den pH-Wert am Ende mit einer Zitronensäurelösung auf etwa 5,2 ein.