Ultra Moisturizing Toner

This facial toner balances the pH level and provides intensive moisture during toning. Excellent for dry to very dry skin.

Regenine provides moisture and has an antioxidant effect. Niacinamide has an antioxidant effect and strengthens the skin barrier. Calcium Pantothenate soothes and stimulates cell regeneration.

 

Difficulty level:  ⭐ easy

Preparation time: ⏱ approx. 10 minutes

Ingredients in percent 

A 10  Propanediol Green
  0.1 Low Molecular Weight Hyaluronic Acid
B 45.7 distilled water
40 Rose Hydrolat
  1 Regenine

0.1 Arginine
  1 Niacinamide
  0.2 Calcium Pantothenate
  2 Preblend Aqua

 TOTAL 100%

 

Instructions:

  1. Weigh A and stir.
  2. Weigh B and stir until all components have dissolved.
  3. Add B to A while stirring.
  4. Adjust the pH value to approx. 4.5 using Regenine. 

 

Tip:

Apply evenly with a cotton pad after facial cleansing. Washing products like soaps or surfactants remove not only dirt but also the skin's own oils and the acid mantle. A facial toner removes any remaining traces of dirt and surfactants while helping to regenerate the skin's natural pH level. For this reason, toners should always have a slightly lower pH value than other skincare products – between 4 and 5. Regenine is the perfect active ingredient for this, as it not only has an acidic effect but also provides the skin with moisture.


FAQ: Frequently Asked Questions about Ultra Moisturizing Toner

Für welche Haut eignet sich der Ultra Moisturizing Toner?

Der Toner spendet schon beim Tonisieren intensive Feuchtigkeit und ist hervorragend für trockene bis sehr trockene Haut geeignet.

Wie schwierig ist die Herstellung?

Der Toner ist leicht herzustellen und in etwa 10 Minuten fertig. Du verrührst Phase A und Phase B getrennt, gibst B zu A und stellst den pH-Wert ein.

Warum sollte ein Toner einen niedrigen pH-Wert haben?

Seifen und Tenside entfernen neben Schmutz auch Hautfett und den Säureschutzmantel. Ein Toner mit einem pH-Wert zwischen 4 und 5 entfernt letzte Reste und hilft der Haut, ihren natürlichen pH-Wert schneller wiederherzustellen. Dieser Toner wird auf etwa 4,5 eingestellt.

Wie wende ich den Toner an?

Trage den Toner nach der Gesichtsreinigung gleichmäßig mit einem Wattepad auf.